With the Sermoon D3 Pro, Creality is now offering a powerful 3D printer with two hotends. For the second hotend, the offset is automatically taken into account. It is advertised with high accuracy and a flexible printing plate.
Silvio Werner (translated by Anton Avdyushkin), Published 🇩🇪
3D printers are now also available at very reasonable prices. The Sermoon D3 Pro, on the other hand, is aimed at demanding customers and therefore also comes with a second hotend, which should allow extrusion to be changed without losing any time. The XYZ offset of the second hotend is to be determined automatically, which should be faster and more accurate than manual handling. Creality puts the maximum flow rate at 32 mm³/s and the maximum possible printing temperature at 300 °C. The high printing speed also predestines the model for commercial use.
The 43-kilogram 3D printer can print models measuring up to 290 x 220 x 300 millimetres. Printing of PLA, PETG, PET, PVA, PA, and ABS, among others, is supported. In contrast to particularly inexpensive models, the Sermoon D3 Pro is enclosed. The printing chamber is heated evenly to 60° C, which prevents temperature-related deformation and guarantees a strong bond between the individual layers. The printing plate can be heated up to 120 °C. The matt surface of the printing plate is said to produce a fine and smooth underside of the model – as the printing plate itself is also flexible, finished prints should be easy to remove.
Unsurprisingly, leveling is said to be automatic and printing can continue after a power failure. A camera is available and the 4.3-inch touchscreen should ensure simple operation. WiFI, USB, and Ethernet are also available. An air filter is installed.
The Sermoon D3 Pro is now available directly from the manufacturer at a price of 3,019 euros.
Related Articles
Editor of the original article: Silvio Werner – Senior Tech Writer – 8709 articles published on Notebookcheck since 2017
I have been active as a journalist for over 10 years, most of it in the field of technology. I worked for Tom’s Hardware and ComputerBase, among others, and have been working for Notebookcheck since 2017. My current focus is particularly on mini PCs and single-board computers such as the Raspberry Pi – so in other words, compact systems with a lot of potential. In addition, I have a soft spot for all kinds of wearables, especially smartwatches. My main profession is as a laboratory engineer, which is why neither scientific contexts nor the interpretation of complex measurements are foreign to me.
Translator: Anton Avdyushkin – Translator – 3225 articles published on Notebookcheck since 2018
Silvio Werner, 2023-12- 8 (Update: 2023-12- 8)